当前位置:
- 海工装备
- 标准
- 检测标准
-
- JJG(交通) 009-1997 四活塞联动式油耗仪检定规程(试行)
()
-
发布日期:1997
实施日期:
主管部门:
-
简介:
-
- JJG 159-2008 双活塞式压力真空计检定规程
()
-
发布日期:2008-03-25
实施日期:2008-09-25
主管部门:
-
简介:本规程适用于测量范围为(-0.1~1)MPa的双<a href="http://www.zbgb.org/64/StandardDetail719027.htm" target="_blank">活塞式压力真空计</a>的首次检定、后续检定和使用中检验。
-
- JJG 159-1994 二、三等标准双活塞式压力真空计
()
-
发布日期:1994
实施日期:1994-12-01
主管部门:
-
简介:
-
- SAE AS 1B-1996 飞机活塞式发动机性能高度图
()
-
发布日期:1996-08-01
实施日期:
主管部门:
-
简介:This SAE Aerospace Standard (AS) provides for aircraft reciprocating engines formats for altitude graph sheets recommended for use when presenting engine performance data.
-
- SAE J1568-2012 液压盘式制动器缸的塑料活塞材料
()
-
发布日期:2012-04-01
实施日期:2012-04-01
主管部门:
-
简介:The materials defined by this SAE Standard are glass-fiber-reinforced, mineral-filled <a href="http://www.zbgb.org/47/StandardDetail707636.htm" target="_blank">phenolic molding compounds</a> suitable for compression molding. Performs may be radio frequency preheated or screw preheated slugs. Compound for use in hydraulic disc brake caliper pistons.
-
- SAE J1966-2011 活塞式飞机发动机润滑油(非分散剂的矿物油)
()
-
发布日期:2011-08-01
实施日期:2011-08-01
主管部门:
-
简介:This SAE Standard establishes the requirements for nondispersant, mineral <a href="http://www.zbgb.org/156/StandardDetail457339.htm" target="_blank">lubricating oil</a>s to be used in four-stroke cycle piston aircraft engines. This document covers the same lubricating oil requirements as the former military specification MIL-L-6082. Users should consult their engine manufacturers manuals for the latest listing of acceptable lubricants.
-
- KS B6329-2002 旋转活塞密封式冷冻剂压缩机
()
-
发布日期:
实施日期:2007-11-05
主管部门:
-
简介: